HPE MSL2024 CHASSIS ROHS 407351-001
|Height||87.5 mm (3.44 inches)|
|Width||444.5 mm (17.5 inches)|
|Depth||775.5 mm (30.53 inches)|
|Weight||15 kg (33.07 pounds)|
|Operating||10° to 35° C (50° to 95° F)|
|Non-operating||-30° to 60° C (-22° to 140° F)|
|Recommended operating temperatures||-40 ° C to 60 ° C|
|Temperature shock immunity – maximum rate of change||10 ° C per hour|
|Relative Humidity (non-condensing)|
|Operating||20% to 80%|
|Non-operating||20% to 90%|
|Humidity||20 – 80 percent RH non-condensing|
|Clearance||Back: minimum of 15.4 cm (6 inches)
Front: minimum of 30.8 cm (12 inches)
Sides: minimum of 5.08 cm (2 inches)
|Maximum Number of Drives|
|Proven Reliability||2,000,000 robot load/unload cycles|
|Disaster Recovery and Security||LTO-6 Ultrium tape drives include WORM capability|
|Data Rate Matching (ATS data transfer rate range (native))|
|HPE Ultrium WORM||High-capacity, low-cost HPE WORM media that can store up to 6.25 TB (2.5:1 compression) of data on a single data cartridge
NOTE: While all HPE LTO-7, LTO-6, LTO-5, LTO-4, and LTO-3 Ultrium tape drives support LTO Ultrium WORM media, some LTO Ultrium tape drives from other manufacturers may not include read and write support for LTO Ultrium WORM media. For non-HPE LTO Ultrium tape drives, please check the manufacturers’ specifications to ensure this support is provided if you are using your WORM media. If WORM support is not provided, the drive will eject the WORM tape cartridge immediately upon insertion into to the tape drive.
Sprague Europe provides REPAIR services for tape drives, libraries, robot assemblies, pickers and other backup systems components (PCB, tape drive HEADS, DECKS, etc.).
If you are not able to find needed part in our shop, you need more quantities, or information about repair, please contact us by phone or email.